ERON-NABEYA調平塊M型
品牌：EROWA(愛路華)
型號：M50
<tbody id="8qkqs"></tbody> ￥待詢價（提交訂單10分鐘內獲取專屬報價單）
1、由思誠資源優選發貨，并提供售后服務
2、因庫存實時變化，具體發貨時間以實際發貨為準
EROWA(愛路華)區域經理 李經理：18929218517咨詢| 技術參數 | ITS定位片 |
| 材料 | 防腐蝕 |
| 在卡簽署上的系統精度 | 0.002mm |
| 定位50 | 小型電極 |
| 定位片100 M8 | 工件和電極 |
| 定位片G | 工件，切削加工中的夾具 |
| 操作 | 用EROWA搬運系統或電極交換裝轉置 |
ER-011599，EROWA定位片100 M8 （一套10組）
ER-050195，EROWA定位片100 M8 （一組）
規格：防腐蝕，每組含4個M8的支撐腳和4個M5螺釘
應用：工件和電極
安裝：直接裝于毛坯的平面上
ER-011599 Centering Plate 100 M8 (set of 10 pieces)
ER-050195 Center ing plate 100 M8 (1 Unit)
Version: Corrosion-resistant, including 4 supporting fee M8 and 4 X M5 screws per plate.
Application: Workpieces and electrodes.
Mounting: Mounted directly on of blank plane surface of blank
Centering plate 100 M8
Check package contents
Centering plate
Base plate
Support foot M8
Bolts M5
Washer ? 5.3 / 10 x 1
Technical data
Application: for electrodes of min. ? 100mm and 90mm
A ) Base plate(thickness: 0.6mm)
B ) Centering plate (thickness: 0.6mm)
C ) Positioning mark and reference marks
D ) Support foot SW13 M8x16
Setting up
Preparations
- Machine the surface to which centering plate is to be fitted. Note that turning provides a more even surface than milling.
- Drill holes according to the pattern shown below. For this purpose, we supply a drill template ER-010710 (option) as an option. The hole pattern can also be produced with the help of an CNC machine.
Note:
The ? 8mm and ?10mm holes are to accommodate the prismatic spigots of the rapid-action chuck and must therefore be drilled in any case.
The ? 4H7 holes are only necessary if the centering plate must be aligned in relation to a given reference surface.
Assembly
Put base plate on the hole pattern of the blank.
Put centering plate on top in the congruent position.
Note:
The positioning marks (A) must be visible on the side of the support feet. If a reference surface has been given, the reference surface has been given, the reference marks must refer to it.
- If necessary, align centering plate with ?4 straight pins. Remove the straight pins after the alingnment.
- Turn the 4 support feet into the M8 threads (C) and tighten to 35 Nm.
- Turn the 4 screws M5 (B) with washers (G) into the M5 threads (B) and tighten to 6Nm.
After assembly, grind the support feet to the tolerated measurement of 11.2 +0.01/-0.05 (D). Try to achieve an evenness of 0.001mm. If necessary, lap the support feet.
Note:
Measuring points on the mounting surface are possible in the notches (E) or beside the plates (F), depending on the version.
思誠資源為您提供：ER-011599 ER-050195 EROWA定位片100 M8 （一套10組）的采購報價、EROWA(愛路華)ER-011599型號參數、規格圖片、PDF畫冊等資料，如您想了解更多關于EROWA(愛路華)正品品牌的其他夾具配件資料與產品貨期庫存、行情價格，就在思誠資源MRO商城。
備注：因廠家會在沒有任何提前通知的情況下更改產品包裝、產地或者一些附件，本公司不能確?？蛻羰盏降呢浳锱c思誠資源網站提供的產品圖片、產地、附件說明等完全一致。若本網站沒有及時更新，敬請諒解！
<tbody id="8qkqs"></tbody>